Sartorius combics 1 Service Manual

22
display_wps1_serv.eps
display_serv_01.eps
menu_1181.eps
user1Ib.eps
user2Ib.eps
menu_1181.eps
Menu Item 1-18: Entering Calibration/Linearization Weights
1-18-1: External User-defined Calibration Weight (Service Mode not Required)
– Activate the service mode (see page 16).
– Select weighing platform “WP1”.
– Press the ) key to open the numeric menu.
– Select menu item 1-18-1 (external user-defined weight) by pressing k )
repeatedly.
– Activate input mode for the user-defined weight (press ) briefly).
The first digit flashes.
– Enter the user-defined weight (in this example: 10,000 lb) (key sequence:
) k ) p ) ) ) k )). The last number entered flashes.
– Press the ) key again to store the user-defined weight; the menu jumps back
to 1-18-1.
– To exit the service mode, press and hold the ) key for longer than 2 seconds.

Sartorius combics 1 Specifications

General

Brand	Sartorius
Model	combics 1
Category	Monitor
Language	English