25
If the acceleration of gravity has been entered, this data takes precedence over
any
geographical data (latitude and altitude) previously entered.
Valid Locations for Use
Once the exact geographical data or the acceleration of gravity has been entered
and subsequent span adjustment performed, a scale with a resolution of 3000
digits can be used within a tolerance zone of ±100 km from the latitude entered
and ±200 m from the altitude.
The same applies when the acceleration of gravity is entered.
The following values are entered when the Combics scale is adjusted
in Goettingen, Germany:
– Latitude: 51.53 degrees (= 51° 32’)
– Altitude: 151 m
– or the corresponding acceleration of gravity, 9.811590 m/s-2
The greater the precision of the geographical data entered, the greater the
precision achieved with the weighing instrument; the tolerance range, however,
is restricted accordingly (see above).
To Next Page
Loading...
Need help?
General
