35
Preparation
Set parameters for Net-Total Formulation:
$ Select the application program in the
operating menu
§ Set parameters for automatic printout when
component stored
2 Application programs
2 1 Program selection
2 1 6* Net-total
7 Print for Application
7 1 Print application parameters
7 1 1 Off
7 1 2 ο On; all parameters
7 1 3 On; only main parameters
7 3 Printout of net-total formulation data
7 3 1 ο Autom. print of last net value
7 3 2 Autom. print of tare value
ο = Factory setting
* = Factory setting on CP…-ACE models only
Printout of Net-total Formulation Data
Comp2 + 278.1 g : Second component
T COMP+ 2117.5 g : Sum of components
T1 + 1821.5 g: Tare weight (2nd tare memory)
N1 + 278.1 g : Net weight = Gross – Tare –
2nd Tare memory
N + 2099.6 g : Net weight = Gross – Tare
To Next Page
Loading...