Net-Total Formulation
34
Menu code: 2 1 6*
Display symbol: R
Purpose
With this application program you can
weigh in different components up to
a defined total. You can also print out the
total weight and the individual weights
of the components.
Features
– Tare function
– Weigh up to 99 components from “0" to a
defined total component weight
– Store component weights (“Store xx comp."),
with
– display zeroed automatically after value
is stored, and
– automatic printout (print application
parameters); either
– of the last component weight (net value)
or
– of the total weight (tare value)
– Clear component memory when weighing
series is canceled by pressing c; total
weight printed if “Print all parameters" is
selected in the operating menu; otherwise,
the normal net weight printout is generated
(p key).
– Toggling between component weight and
total weight by pressing and holding v.
– Printout of the total of the individual
component weights (T COMP)
* = Factory setting on CP…-ACE models only
To Next Page
Loading...