23
Configuring the Balance/Scale
Purpose
You can configure your balance/scale
to meet individual requirements by
selecting from parameter settings in a
software menu.
Key functions during configuration:
Activate the settings menu:
Press e to turn the balance/scale off
and back on again. While all display
segments are lit, press t briefly
Scroll upward ↑: press q
Scroll right →: press p
Confirm input: press t
Store settings and exit menu:
Press and hold t (2 sec.)
● Print Current Settings
– At the 3rd menu level (lowest level):
Press and hold p
> Printout: (Example)
Menu711
– At the 2nd menu level: Press and hold p
> Printout (Example)
Menu711
Menu721
Menu731
– At the 1st menu level: Press and hold p
> All current settings are printed.
To Next Page
Loading...