EasyManua.ls Logo

Sartorius ED224S-0CE - Getting Started

Sartorius ED224S-0CE
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting Started
Storage and Shipping Conditions
Do not expose the balance/scale to
extreme temperatures, moisture, shocks,
blows or vibration.
Unpacking the Equipment
§ After unpacking the equipment, please
check it immediately for any external
damage.
$ If you detect any damage, proceed as
directed in the chapter entitled “Care
and Maintenance,” under “Safety
Inspection.”
$ Save the box and all parts of the
packaging for any future transport.
Disconnect all cables before packing
the balance/scale for shipping.
Equipment Supplied
Balance/scale
Weighing pan
Pan support (only for models
with a round weighing pan)
Gem tray (GK and GW models only)
AC adapter
Additional equipment supplied with
models ED224S, ED124S, GK1203,
GK1403, GK703, GK303:
Draft shield chamber with sliding doors
Shield ring
Shield plate
Dust cover
Additional equipment supplied
with models ED423S-DS, ED323S-DS,
ED153-DS:
Draft shield chamber with sliding doors
Additional equipment supplied
with models GK3102, GK2202,
GW6202-0CEDS, GW3202-0CEDS:
Metal disk
Draft shield chamber with sliding doors
Additional equipment supplied with
models ED623S(-CW), ED523S-PCE,
ED423S(-CW), ED323S(-CW),
ED153(-CW):
Round glass draft shield with cover
Installation
Choose a location that is not subject
to the following negative influences:
Heat (heater or direct sunlight)
Drafts from open windows and doors
Excessive vibration during weighing
Excessive moisture
Conditioning the Balance/Scale
Moisture in the air can condense on
cold surfaces whenever the equipment
is moved to a substantially warmer
place. To avoid the effects of condensa-
tion, condition the weighing instrument
for 2 hours at room temperature,
leaving it unplugged from AC power.
Seal on Balances/Scales Verified for
Use in Legal Metrology in the EU*:
EU legislation requires that a control
seal be affixed to verified balances/
scales. The control seal consists of a
sticker with the “Sartorius” logo. If the
seal is broken, the verification becomes
null and void and the balance/scale
must be re-verified.
* Including the Signatories of the Agree-
ment on the European Economic Area
5

Related product manuals