Sartorius ED4202S-0CE - Application Programs; Weight Unit Settings; Counting Application Settings; Weighing in Percent Settings

Level 1 Level 2 Level 3 Level 4 Menu code
Applic. Weigh 2. 1.
Applic. Unit Disp.Dig.
1
) ο All 2. 2. 2. 1
programs Toggle units Display Minus 1 2. 2. 2. 2
accuracy divis. 1 1 interval 2. 2. 2. 6
Counting Resolut. ο Disp.Acc. Display accuracy 2. 3. 1. 1
Resolution 10-fold 10 times > disp. 2. 3. 1. 2
Ref.Updt. ο Off 2. 3. 2. 1
Autom. reference Auto 2. 3. 2. 2
updating
Percent
2
) Dec.Plcs None No dec. places 2. 4. 1. 1
Weighing Decimal places ο 1 Dec.Pl. 1 decimal place 2. 4. 1. 2
in percent 2 Dec.Pl. 2 decimal places 2. 4. 1. 3
3 Dec.Pl. 3 decimal places 2. 4. 1. 4
Net-Tot Comp.Prt. Off 2. 5. 1. 1
Net-total Component ο On 2. 5. 1. 2
printout
Total
2
) Comp.Prt. Off 2. 6. 1. 1
Totalizing Component ο On 2. 6. 1. 2
printout
AnimalW.
2
) Activty. Calm Fluct.: 2% of test obj.) 2. 7. 1. 1
Animal Animal activity ο Active (fluct.: 5% of test obj.) 2. 7. 1. 2
weighing V.Active (fluct.: 20% of test obj.) 2. 7. 1. 3
Start Manual 2. 7. 2. 1
ο Auto. Automatic 2. 7. 2. 2
Calc.
2
) Method ο Mul. Multiplier 2. 8. 1. 1
Calculation (operator) Div. Divisor 2. 8. 1. 2
Dec.Plcs None No dec. places 2. 8. 2. 1
Decimal ο 1 Dec.Pl. 1 decimal place 2. 8. 2. 2
places 2 Dec.Pl. 2 decimal places 2. 8. 2. 3
3 Dec. Pl. 3 decimal places 2. 8. 2. 4
Density
2
) Dec.Plcs None No dec. places 2. 9. 1. 1
Density Decimal places ο 1 Dec.Pl.1 decimal place 2. 9. 1. 2
determination 2 Dec.Pl. 2 decimal places 2. 9. 1. 3
3 Dec. Pl. 3 decimal places 2. 9. 1. 4
1
) Setting cannot be changed on verified balances/scales
2
) not on ED…-PCE models
24