Operation
Position Designation
1 Weight units
2 Menu level indicator
3 Taring
4 Symbol:
“GLP printing mode active”
5 Symbol: “Printing mode active”
6 Symbol:
“Application program active”
7 Data output:
Press this key to send readout
values to the built-in data
interface.
8 Calculated-value indicator
(i.e., not a weight value)
9 Start an application program
10 Symbol: Gross or net value
11 Select an application program |
Open the operating menu
12 Symbols for active application
(W, Z, L, V, R, A, C)
Position Designation
13 Delete (Clear Function)
This key is generally used to
cancel functions:
– Quit application program
– Cancel calibration/adjustment
routine | Exit the operating menu
14 Start calibration/adjustment routine
15 On/off
16 Symbol:
Calibration/adjustment function
17 Symbols for zero range
(verified models only)
18 Level indicator
19 Weight value displayed
in selected weight unit
Symbols:
<< Save settings and exit the
operating menu
< One menu level higher
V Scroll through menu items
> Next item on current menu level
↵ Select a parameter setting
12
Overview of Display and Operating Elements
To Next Page
Loading...