1 User Information
1.1 Warning/Danger Symbols
These notes identify hazards which have a high
probability of resulting in death or serious
physical injury if not avoided.
These notes identify hazards that can result in
moderate or mild injuries if not avoided.
These notes identify hazards associated with the
risk of material damage.
1.2 Explanation of Symbols
This symbol identifies useful information and
tips.
The following symbols are used in these instructions:
t indicates required steps
y describes what happens after you have performed a
particular step
− texts that use this mark are lists
Conventions for these Instructions:
The figures in these instructions are based on “standard”
scales. On scales verified for use in legal metrology, some
displays and reports may deviate slightly from the figures.
Where this is significant for operation, the differences will
be explained in the text.
1.3 About These Instructions
t Please read these instructions carefully and completely
before putting the equipment into operation for the first
time. Observe the safety instructions.
t These instructions are an important part of the product.
Keep these instructions in a safe place. If you give the
device to others to use, give them these instructions too.
t If these instructions are lost, please contact Sartorius for
a replacement or download the latest manual from our
website: www.sartorius.com/paintmixing
2 Safety Information
2.1 Guidelines and General Information
− The scale and the ex-link converter meet the relevant
EU Directives and applicable harmonized standards
(see “EC Type Examination Certificate” in the Appendix).
− Improper use or handling, however, can result in damage
and/or injury. Any improper use or operation of the scale
or of the ex-link converter, i.e., that is not consistent with
the instructions, will result in forfeiture of all claims under
the manufacturer’s warranty.
− Personnel need to have read and understood these
installation instructions, including the safety instructions.
− In the event of use in systems and ambient conditions
which have greater safety requirements, you must observe
the requirements and provisions applicable in your
country.
− Always keep the equipment and scale freely accessible.
Make sure that the voltage rating printed on the
AC adapter is identical to your local mains
voltage.
Contents
1 User Information..........................................3
1.1 Warning/Danger Symbols.............................3
1.2 Explanation of Symbols............................... 3
1.3 About These Instructions ............................. 3
2 Safety Information
........................................3
2.1 Guidelines and General Information..................3
2.2 Installation Information ..............................4
2.3 Intended Use.......................................... 5
3 Getting Started ...........................................5
3.1 Unpacking and Equipment Supplied.................. 5
3.2 Selecting a Setup Location ........................... 5
3.3 Installing the Scale.................................... 5
3.4 Power Supply .........................................5
3.5 Anti-theft Locking Device ............................ 7
3.6 Leveling ...............................................7
3.7 Warm-up Time ........................................7
4 Care and Maintenance
...................................8
4.1 Cleaning............................................... 8
4.2 Maintenance .......................................... 8
5 Disposal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6 Accessories
.................................................9
7 Serial Number Coding
....................................9
8 Specifications
............................................10
8.1 General Data .........................................10
8.2 Model-specific Data .................................11
EVO1X | LAB1X Installation Instructions 3
English
To Next Page
Loading...
Need help?
General