Scale connected to AC power:
On/Off Switch:
On: Scale is operational and display
shows function or mode that is in use
Off: Depends on menu setting (“4.
Standby option.”), scale is completely
off (no display and no internal circuitry)
or in standby (no display and internal
circuitry working).
Back Light:
Depends on menu setting (“2. Back-
light”). Backlight is on/off.
Auto Power Off:
Not active.
Scale running on battery power:
On/Off Switch:
On: Scale is operational and the display
shows the function or mode that is in
use
Off: Completely off (no display and no
internal circuitry working)
Back Light:
Depends on menu setting (“2. Back-
light”). Backlight is on/off. Backlight
goes off after 15 seconds if no opera-
tion is done (no key pressed/no weigh-
ing). Backlight comes back on whenever
a key (except on/off) is pressed or when
a load is placed on the scale.
Auto Power Off:
Depends on menu setting (“3. Auto
power off”); system power shuts down.
Time limit options for auto power in
setup menu are 5, 10 or 15 minutes,
or can be disabled.
14
Power Management Option
To Next Page
Loading...
