5
For the User
– Always make sure the equipment is
disconnected from AC power before
performing any installation, cleaning,
maintenance or repair work on the scale.
– If you see any indication that the scale
cannot be operated safely (for example,
due to damage), turn it off and lock it in
a secure place or otherwise prevent use of
the equipment for the time being.
– Chemicals (e.g., gases or dusts) that can
corrode and damage the inside or outside
of the device must be kept away from the
equipment. Handle the equipment and
any accessories in accordance with the IP
rating (IP65 or higher) and EN 60529.
– The casing on all connecting cables,
as well as the casing on wires inside the
equipment housing, is made of PVC.
The casing of the power cable is made
of rubber.
– Do not expose the scale to aggressive
chemical vapors or to extreme tempera-
tures, moisture, shocks, or vibration.
The allowable operating temperature
range during operation is 0°C to +40°C
+(32°F to +104F). Make sure the place
of installation is adequately ventilated to
prevent build-up of excessive heat.
– Use original Sartorius spare parts only.
– Never use a hammer to close the lid of a
paint can while it is still on the weigh-
ing pan. Otherwise, you will damage the
weighing system.
PMA7501-X Designed for Use in Zone 1 Hazardous Areas
Please refer to the drawings unter “Verification of Intrinsic Safety” for details.
To Next Page
Loading...
