Need help?Do you have a question about the Sartorius PMA.HD and is the answer not in the manual?
General| Readability | 0.01 g |
|---|---|
| Linearity | ±0.02 g |
| Calibration | External calibration |
| Interface | RS-232 |
| Pan Size | 180 mm |
| Display | LCD |
| Power Supply | AC adapter |
| Repeatability | 0.01 g |
| Weighing Technology | Monolithic Weighing Cell |
Defines the scope of these operating instructions for color-mixing scale models.
Explains warning, caution, important, and information symbols used throughout the manual.
Notes that illustrations are based on the PMA.Evolution (EVO1S1) model.
Provides general safety guidelines, including warnings about explosion hazards and electrical safety.
Covers precautions for installation, environmental conditions, and use of original accessories.
Specifies the scale's intended purpose for paint mixing in non-explosive atmospheres.
Identifies the main components visible on the front of the scale.
Identifies the main components visible on the rear of the scale.
Explains the function of each button and display element on the scale's interface.
Details the hierarchical menu structure and functions available on the scale.
Instructions for unpacking the scale and checking the included equipment.
Guidelines for choosing an appropriate and safe location for the scale installation.
Instructions on how to physically install the weighing pan onto the scale.
Details on power supply options, including AC adapter assembly and selection.
Steps for connecting the scale via USB and to the power supply.
Instructions on how to secure the scale using the anti-theft device.
Procedure for leveling the scale to ensure accurate and reproducible weighing results.
Explanation of the importance of scale warm-up time for accurate measurements.
Instructions for powering the scale on, off, and entering standby mode.
How to lock and unlock the scale's keypad and weight display for security.
Procedure for zeroing or taring the scale to set a reference weight.
Introduction to the process of calibrating and adjusting the scale.
Detailed steps for external calibration, especially for verified scales.
Basic instructions for weighing, including notes for verified scales and temperature limits.
Step-by-step guide for performing a weighing operation with one decimal place.
Procedure for weighing with two decimal places, applicable for non-verified models.
Overview of available application programs and how calculated values are marked.
Explains how to use the factor function for weighing amounts relative to a base formula.
Instructions for using the recalculation function to correct overpoured components.
Introduction to accessing and configuring the scale's menu settings.
Detailed steps on how to navigate and access the scale's SETUP menu.
Overview of configuring various main menu settings, including language and units.
Procedure for selecting the desired language for the scale's interface.
Details default settings for units, accuracy, and polyrange for non-verified models.
Instructions on activating and using the toggle key to switch between units or decimal places.
How to activate the LOCK function to prevent unauthorized use and secure the display.
Configuration of password protection for enhanced security and deactivation of LOCK function.
Instructions for restoring the scale to its original factory settings.
Detailed instructions for cleaning the scale's housing, control panel, and other parts.
Recommendations for regular servicing and safety inspections of the scale and adapter.
Lists common problems, their causes, and recommended remedies for troubleshooting the scale.
Guidelines for proper storage conditions to maintain the scale's integrity.
Instructions for environmentally friendly disposal and recycling of the scale and its packaging.
Provides general specifications, power requirements, and ambient operating conditions.
Details specific technical specifications for PMA.Evolution and PMA.HD models.
Lists specific metrological specifications for verified scale models.
Provides dimensional drawings and measurements for the PMA.Evolution and PMA.HD models.
Explains the purpose and functionality of the USB interface for PC connectivity.
Steps for installing the scale's software driver using Windows Update.
Steps for installing the scale's software driver using the provided CD.
Includes changing COM port numbers and uninstalling the driver.
Lists available accessories for the scale, including cables and calibration weights.
Information on how to contact Sartorius Service for support and inquiries.
Confirms the device's compliance with relevant EU directives and standards.
Provides details on directives, standards, and responsible parties for the EU Declaration of Conformity.
Statement confirming compliance with FCC Rules for radio frequency emissions.
Details the EU-type examination certificate issued for the weighing instrument family.
Illustrates and identifies various plates and markings found on the scale.
Provides detailed descriptions for metrological data, protective seals, CE markings, and switches.
To Next Page
