Need help?Do you have a question about the Sartorius PMA 7501-X and is the answer not in the manual?
General| Maximum Capacity | 7500 g |
|---|---|
| Readability | 0.1 g |
| Calibration | External |
| Display | LCD |
| Dimensions | 220 x 330 x 90 mm |
| Capacity | 7500 g |
| Repeatability | 0.1 g |
| Linearity | ±0.2 g |
| Interface | RS-232 |
| Power Supply | AC adapter |
| Weight | 4.2 kg |
| Stabilization time (typical) | 2 s |
Details installation requirements for hazardous locations, referencing EC directives and ATEX certification.
Highlights risks from improper use, handling, and maintenance, emphasizing qualified personnel and compliance.
Restricts use to defined areas, requires adherence to instructions, and voids warranty if housing is opened improperly.
Advises connecting bonding conductors, avoiding extreme conditions, and using the equipment indoors.
Warns against aggressive cleaning agents and chemical exposure, and specifies IP rating compliance.
Lists the components included in the PMA7501-X package: scale, weighing pan, and power supply.
Provides guidance on selecting a suitable location and preparing the scale for operation.
Instructions for connecting the scale to the grounding terminal for electrical safety.
Explains how to perform weighing operations using a single decimal place for measurements.
Details how decimal places and display limits change based on weight for two-decimal place weighing.
Enables weighing with a selectable factor for calculating proportional amounts in formulations.
Explains how to use the correction factor ('C') to adjust formula quantities and check total weight.
Specifies the required warm-up time before performing calibration or adjustment for accurate results.
Step-by-step guide on how to calibrate and adjust the scale using a calibration weight.
Explains the hierarchical navigation within the SETUP menu using the control keys.
Demonstrates navigating the menu to adjust settings for ambient conditions.
Details how to select the display language from a list of available options.
Explains how to activate and configure the toggle key for decimal places and units.
Guides on assigning functions like unit (grams/parts) and decimal places to the toggle key.
Explains how to activate the lock function to prevent unauthorized use or changes.
Details the process of setting a password to protect the scale's functions and settings.
Instructions on how to disable the lock function, requiring password entry.
Allows selection between long or short display prompts for operator guidance.
Procedure for resetting the scale to its original factory settings, potentially requiring a password.
Information on setting numerical codes for menu items, with reference to further documentation.
Addresses the problem of the display showing no segments, typically related to power issues.
Solutions for weight display showing 'Low' (pan not in place) or 'High' (exceeds capacity).
Troubleshooting for unstable weight readings due to ambient conditions or drafts.
Diagnoses for incorrect weight readings, including unstable components or untared scale.
Fixes for when no weight is displayed and the lock symbol is active, often due to communication interruption.
Guidelines for safely cleaning the scale using appropriate materials and avoiding liquid ingress.
Specifies temperature and moisture limits for storing or shipping the scale.
Details conditions under which safe operation is no longer ensured and when to contact service.
Information on proper disposal of the scale and packaging according to local regulations and recycling practices.
Details the weighing capacity, readability, tare range, and linearity of the scale.
Describes the RS-232 interface, its format, parity, transmission rates, and pin assignments.
Details the order number for the optional in-use dust cover for protecting the scale.
Lists order numbers for certified EX power supplies for different regions (EC, UK, USA/CDN).
Provides manufacturer details, device type, and applicable European directives and standards.
Certifies conformity with essential requirements of European directives and applicable harmonized standards.
Details ATEX marking, EC-Type Examination Certificate number, and notified body information for explosion protection.
Certifies compliance of equipment and protective systems for use in potentially explosive atmospheres per Directive 94/9/EC.
Specifies the required ATEX marking for the equipment, including protection type and gas group.
Lists the different models included in the PMA7501.-X... series, with and without displays.
Provides electrical data, including intrinsic safety parameters (Ui, Ii, Pi, Ci, Li) for various circuits.
Details intrinsic safety parameters for supply and data circuits, including connection to certified intrinsically safe circuits.
Specifies essential conditions for safe operation, including ambient temperature range and protection of unused connections.
Confirms assurance of essential health and safety requirements through compliance with listed standards.
Diagram illustrating connections for hazardous and non-hazardous locations, including intrinsic safety parameters.
Provides detailed intrinsic safety parameters (Ui, Io, Po, Co, Lo) for different connection types and models.
Illustrates the connection of power supply and PA for equipotential bonding, detailing intrinsic safety parameters.
Details specifications and intrinsic safety parameters for the YDI05-Z.. interface converter.
Provides intrinsic safety parameters and connection details for the RS-232 data output port.
Details specifications and intrinsic safety parameters for the YCO11-Z Ex-link box.
Explains differential data transmission capabilities and limitations with the Ex-link box and power supply cable.
Details Canadian hazardous location equipment compliance, including intrinsically safe circuits and entity parameters.
Lists relevant approval standards and documents that the equipment complies with.
Lists revision reports and dates when the approval status of the equipment was amended.
To Next Page