Toggling Decimal Places (Standard = 1 decimal place
PolyRange = 2 decimal places)
Toggling Units (Grams or PT./PD.)
These settings are active when the scale is switched on.
Level 1 Level 2 Level 3 Level 4
SETUP § Press the L key [ENTER]
SCALE § Press the L key [ENTER]
DECIMALS § RS keys: select “DECIMALS”
§ Press the L key [ENTER]
o STANDARD § RS keys: select “STANDARD”
POLYRANGE § Press the L key [ENTER]; “o” appears:
UNIT the new code has been set.
o GRAMS § Press the c key (Clear) several times
PT./PD. to exit the menu
Activating the “LOCK” Function “
”
By activating the “LOCK” function, you can protect the scale from inappropriate use. When the
“LOCK” function is activated, the scale shows weight values on the readout only when communica-
tion with the PC is active. If data transmission is interrupted, the lock symbol will be displayed. The
scale will automatically be locked, preventing further weighing operations. The “LOCK” function is
configured in the “EXTRAS” menu.
Level 1 Level 2 Level 3 Level 4
SETUP § Press the L key [ENTER]
EXTRAS § RS keys: select “EXTRAS”
§ Press the L key [ENTER]
LOCK § RS keys: select “LOCK”
§ Press the L key [ENTER]
OFF § Select “ON” using the RS keys
o ON Confirm with the L key
§ Press the c key (Clear) several times
to exit the menu
Entering a Password
In addition to activating the “LOCK” function, the user may also enter a password.
Should the user wish to deactivate the “LOCK” function by pressing the “OFF” key, he must first
enter the valid password. The password is comprised of a 6-character numeric code.
Use the RS keys to call up numbers (0 to 9).
Six dashes (------) will appear in the display. The first dash will “blink” in the display.
Select a number (0 to 9) using the RS keys, press the L key [ENTER] to save the number.
The second dash will start to “blink.” Repeat the aforementioned process. Should you wish to assign
a “blank space” to one of the six characters, simply press the L key [ENTER] when the dash begins
to blink.
16
To Next Page
Loading...
