Sartorius PMA 7501-X - Changing the Password; Deactivating the LOCK Function

17
Note:
Keep the numeric code in a safe place.
The scale can only be accessed by entering the correct code.
Level 1 Level 2 Level 3 Level 4
INPUT § RS keys: select “INPUT”
PASSWORD § Press the L key [ENTER]
§ Press the L key [ENTER]
PW..NEW § RS keys: select “PW.NEW”
-------- § Enter the numeric code: press the L key
[ENTER].
§ Press the c key (Clear) several times
to exit the menu
Changing the Password
Should you wish to change the password, you must first correctly enter the old password under
“Password.” “PW.OLD” will be displayed. Following the correct input, “PW.NEW” will automatically
appear. You can now enter a new password, or confirm each blinking dash by pressing the L key
[ENTER]. Blank spaces are then displayed.
Level 1 Level 2 Level 3 Level 4
INPUT § RS keys: select “INPUT”
PASSWORD § Press the L key [ENTER]
PW.OLD § Press the L key [ENTER]
-------- § Enter the old password “PW.OLD”
PW.NEW § “PW.NEW” will appear when the old
password is correctly entered
-------- § Enter the numeric code: press the L key
[ENTER]
§ Press the c key (Clear): reset the menu
You can now deactivate the “LOCK” function.
SETUP § Press the L key [ENTER]
EXTRAS § RS keys: select “EXTRAS”
§ Press the L key [ENTER]
LOCK § RS keys: select “LOCK”
§ Press the L key [ENTER]
o OFF § RS keys: select “OFF”, confirm with the
ON L key [ENTER]
§ Press the c key (Clear) several times
to exit the menu