Sartorius PMA7501-000W - Page 11

3. Pour in the first component.
+ 50.0 g
2. Press the U key (5)
0.0 g
11
Example (cumulative):
1. Place an empty paint can on
the weighing pan (11).
+ 118.0 g
4. Press the L key [MEM] (9).
STO 01
5. Pour in the 2nd component.
+ 110.0 g
6. Press the L key [MEM] (9).
STO 02
7. Pour in the 3rd component.
+ 203.0 g
Oops!
You poured in too much!
The correct weight for the
formula is 200.0 g.
8. Press the y key (4) to start
the recalculation mode.
A “C” (= correct) flashes on
the display
9. Press the y key (4) several
times to correct the value to:
+ 200.0 g
10. Press the L key [MEM] (9).
COR 01
11. 1. Add the first component.
“C1” is displayed. –1.7 g
12. Pour in paint until 0.0 g is
displayed.
0.0 g
13. Press the L key [MEM] (9)
COR 02
14. Add the second compo-
nent. “C2” is displayed.
–2.0 g
15. Pour in paint until the
value 0.0 g is obtained.
0.0 g
16. Press the L key [MEM].
The scale will automatically
return to the formulation
program. “C” disappears.
+ 200.0 g
17. To check the total weight,
press the c key (8) [REC].
“C” = Correction factor, in
this example 1.03.
(Total formula weight +
correction factor = total
weight)
18. Add the fourth component
+1000.0 g
We have come to the end
of our example.