Data Interface
Baud rate Code
150 baud 5 1 1
300 baud 5 1 2
600 baud 5 1 3
1,200 baud 5 1 4*
2,400 baud 5 1 5
4,800 baud 5 1 6
9,600 baud 5 1 7
19,200 baud 5 1 8
Parity Code
Mark 5 2 1
Space 5 2 2
Odd 5 2 3*
Even 5 2 4
Number of stop bits Code
1 stop bit 5 3 1*
2 stop bits 5 3 2
Handshake mode Code
Software 5 4 1
Hardware w/2 characters 5 4 2*
Hardware w/1 character 5 4 3
Forced print when S/a
is pressed Code
Printout is output 3 13 1
Blocked 3 13 2*
Checkweighing Code
Printout is output 4 2 1
Blocked 4 2 2*
Control through control lines
Code
Only in check range 4 3 1
Always 4 3 2*
Only at stability
in check range 4 3 3
Only at stability 4 3 4
* = factory setting
Accuracy test Code
None
(min. load 1 increment) 3 10 1*
99.0% ( 100 incr.) 3 10 2
99.5% ( 200 incr.) 3 10 3
99.8% ( 500 incr.) 3 10 4
99.9% (1000 incr.) 3 10 5
Criterion for storing ref. weight
and tare value
Code
At stability 3 11 1*
At “increased” stability 3 11 2
Reference optimizing Code
Blocked 3 12 1
Manual 3 12 2
Automatic 3 12 3*
To Next Page
Loading...