b means Busy
Once you turn on the scale, the b symbol is
displayed until you press a key. During operation, this
symbol indicates that the scale is still busy processing
a function and will not accept another command to
perform any other functions at this time.
Important Note Concerning Scales Verifiable for Use
as Legal Measuring Instruments:
A weight readout can be displayed in grams “g”
or kilograms “kg” (depends on model).
In addition to grams and kilograms, you can also
weigh in other international weight units on all
standard scales. See the “Scale Operating Menu”
in Part 2 of this manual.
For verified scales QC 7CCE-S0CE and
QC 64EDE-S0CE, which have a verification scale
interval “e” that is greater than the scale interval “d”,
the last digit on the display is bordered.
Taring
A weight can be determined with accuracy only from
a defined zero point. Press the =/z key (14) to
zero the weight display. You can tare within the
entire weighing range of the scale.
Simple Weighing
Place your sample on the load plate (3) to determine
the weight. Read off the weight indicated on the
display only after the weight unit “g” or “kg” appears
as the stability symbol.
b
1–36
▼
To Next Page
Loading...
Need help?
General