EasyManuals Logo

SAS RM-MT330-2 User Manual

SAS RM-MT330-2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
GB
26
Clean the outside of the carburetor and
the space around it.
X
Check the flange, cap and nut are
assembled correctly and tightened
X
Clean the fuel tank.
X
Check all cables and connections.
X
Check the clutch, clutch springs and the
clutch drum for wear. Replace if
necessary by an authorized service
workshop.
X
Replace the spark plug. Check that the
spark plug is fitted with a spark plug cap.
X
To reduce the fire hazard, clean dirt,
leaves and surplus lubricant, etc from the
muffler and engine.
X
MAINTENANCE should be
carried out at REGULAR
INTERVALS in each of the
indicated months or after a
certain number of hours of
operation (whichever comes
first). (1)
Before use
every time
Monthly or
after 25
hours
Every
three
months or
after 50
hours
Every six
months or
after 100
hours
Engine oil
Clean
X
X(1)
Air filter
Clean
X(1)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SAS RM-MT330-2 and is the answer not in the manual?

SAS RM-MT330-2 Specifications

General IconGeneral
BrandSAS
ModelRM-MT330-2
CategoryTrimmer
LanguageEnglish