Satel AXD-200 - Page 5

SATEL AXD-200 3
1 Features
• The type of device selected before or while adding the device to the system.
• Encrypted two-way radio communication in the 866 MHz / 868 MHz / 915 MHz frequency
band (AES standard for the ABAX 2 system).
• Transmission channel diversity – 4 channels for automatic selection of the one that will
enable transmission without interference with other signals in the 866 MHz /
868 MHz / 915 MHz frequency band (ABAX 2 system only).
• Remote update of device firmware (ABAX 2 system only).
• Remote device configuration.
• Built-in temperature sensor (temperature measurement range from -10°C to +55°C).
• ECO option for longer battery life (ABAX 2 system only).
• Battery status control.
• LED indicator.
• Tamper protection against enclosure opening and removal from mounting surface.
• 2 magnets included (for surface and flush mounting).
AMD-200
Magnetic contact
• Detects open door, window, etc.
• Input for connecting an NC type wired detector.
• Occupies 1 position on the device list.
• In the ABAX system, the detector is identified as AMD-100.
AMD-201
Dual channel magnetic contact
• Detects open door, window, etc.
• Input for connecting an NC type wired detector.
• Additional digital channel for a wired detector.
• Occupies 2 positions on the device list (optionally 1 – only the additional NC input is
supported – terminal M1).
• In the ABAX system, the detector is identified as AMD-101.
AMD-202
Magnetic contact with input for roller shutter detector
• Detects open door, window, etc.
• Input for connecting a wired roller shutter detector.
• Input for connecting an NC type wired detector.
• Occupies 2 positions on the device list (optionally 1 – only the additional inputs [roller
shutter – terminal M2 or NC – terminal M1] are supported).
• In the ABAX system, the detector is identified as AMD-102.