Satel AXD-200 - Page 6

4 AXD-200 SATEL
AVD-200
Shock detector and magnetic contact
• Detects shocks and vibrations accompanying attempts to force open a door or window.
• Detects open door, window, etc.
• Input for connecting an NC type wired detector.
• Capability to disable the internal magnetic sensor.
• Occupies 2 positions on the device list (optionally 1 – only the shock detector is
supported).
• In the ABAX system, the detector is identified as AVD-100.
ARD-200
Reorientation detector
• Detects changes in the position of protected object.
• Occupies 1 position on the device list.
• In the ABAX system, the detector is identified as ARD-100.
ATD-200
Temperature detector
• Detects exceeding of the predefined temperature threshold.
• Two programmable temperature thresholds.
• Occupies 2 positions on the device list (optionally 1 – you can program just one
temperature threshold).
• In the ABAX system, the detector is identified as ATD-100.
AFD-200
Water flood detector
• Detects flooding in spaces provided with water installation.
• Occupies 1 position on the device list.
• In the ABAX system, the detector is identified as AFD-100.
The water flood detector requires you to purchase the FPX-1 probe, offered by
SATEL.
ATX-220
Hardwired zone expander: 2 x NC
• Two inputs for connecting NC type wired detectors.
• Two digital channels for wired detectors.
• Occupies 2 positions on the device list (optionally 1 – only one input is supported –
terminal M1 or M2).
ATX-230
Hardwired zone expander: NC and roller shutter
• Input for connecting an NC type wired detector.
• Input for connecting a wired roller shutter detector.
• Two digital channels for wired detectors.