Satloc L8 - Kit Contents

L8 Lightbar Installation Guide 875-3006-000 Rev A1
2
REF
602-1014-000
602-1012-000
602-1016-000 (RH) &
602-1017-000 (LH)
QTY
Lightbar brackets, standard, 5.25"
Lightbar brackets, short, 3"
Lightbar brackets, Wingman, 7.5" (RH
and LH)
PART NUMBER
2
2
Optional
DESCRIPTION
PHOTOGRAPH
B
C
E
F
G
H
602-1018-000
Top bracket
2
Bolt, #10-32 x 21/32"
Nut, #10-32
Washer, #10-32
4
4 (of 10)
4 (of 10)
*80922
*81202
Screw, #10-32 x 5/8"
Washer, Internal Lock, #10-32
4
4
*80013
*80570
*81219
*601-1045-000
Bolt, #10-32 x 25/32"
Nut, #10-32
Washer, #10-32
Backing plate
4
4 (of 10)
4 (of 10)
2
*86071 OR * 86436
*80007
*80570
*81219
Adel clamp
Bolt, #10-32 x 17/32"
Nut, #10-32
Washer, #10-32
2
2
2 (of 10)
2 (of 10)
L8 Lightbar cable for Falcon
L8 Lightbar cable for G4
L8 Lightbar cable for Bantam
Connects Lightbar Cable to GPS
*80011
*80570
*81219
D
Kit Contents
A drill and 1/4" drill bit are required for this installation.
A
L8 for Falcon GPS
L8 for G4 GPS
L8 for Bantam GPS
1
806-4400-000
806-4401-000
806-4402-000
Wingman L8 bracket not pictured
*Part of Hardware Kit
P/N 710-2003-000
050-2205-000
050-2524-000
050-2523-000
1
1
1
Not Pictured