Names and Functions of Components
⚫ Model SK-8110
① Laser projection window:
Do not look into the laser beam
② Lens cover
③ Brightness sensor: Senses the ambient brightness.
The LCD backlight is lit when the surroundings are dark.
④ Display section: Displays the temperature reading and
other related information.
⑤ button: Select emissivity.
⑥ button: Use this button to measure or to register an
emissivity selected in memory
⑦ Clip
⑧ Hole for strap
⑨ Battery compartment
⚫ Model SK-8120 / SK-8130 / SK-8140
① Laser projection window:
Do not look into the laser beam
② Lens cover
③ Brightness sensor: Senses the ambient brightness.
The LCD backlight comes on if the surroundings are dark.
④ Display section: Display the temperature reading and
other related information.
⑤ button: Switch mode (Emissivity → AH → AL)
(SK-8130/SK-8140) Set measurement mode
⑥ / keys: Use these keys to make numerical
setting.
⑦ button: Use this button to measure or to register a
new setting in memory
⑧ Clip
⑨ Hole for hand strap
⑩ Battery compartment
To Next Page
Loading...