7
⚫ Measurement
1. Slide the lens cover to open.
SK-8110 / SK- 8120 / SK-8130
SK-8140
2. Turn the power on by pressing any one of , , , and
buttons.
3. Direct the thermometer to the object and press button.
Note: The object has to be larger than the projected laser circle.
The SK-8140, dual point laser type, only measures the temperature of the spot
where the two beams are focused. (approx. 27 mm away with the spot size of 2.5
mm in diameter)
4. Release the button to hold the temperature reading.
To Next Page
Loading...