Center High-Mounted
Stoplamp (CHMSL)
To change a CHMSL bulb, do the following:
1. Remove the CHMSL cover by pulling down on
the cover edges from inside the vehicle.
2. Turn the bulb socket counterclockwise to
remove it.
3. Replace with the appropriate bulb.
4. Reinstall the bulb socket by turning it
clockwise.
5. Replace the cover.
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To change one of these bulbs, do the following:
1. Open the trunk. See Trunk on page 98
for more information.
2. Remove the three retaining screws from the
taillamp assembly.
324
To Next Page
Loading...
