A. Cover
B. Retainer
C. Jack and Wheel Wrench
D. Stow Bolt Extension
E. Spare Tire
F. Foam Support
G. Bolt
To store a flat or spare tire and tools, do the
following:
1. Remove the stow bolt extension rod and
sleeve from the jack.
2. Re-attach the wheel wrench to the jack.
3. Place the flat tire face down into the spare tire
hub. Avoid scraping the aluminum wheel, if
equipped, on the hold-down bolt.
4. Screw the stow bolt extension rod and
the sleeve into the existing spare tire
hold-down bolt.
5. Place the jack into the center of the flat tire,
being careful not to scratch the inside of
the wheel.
2.0L L4 Supercharged Engine
364
To Next Page
Loading...
