Halogen Bulbs
{CAUTION:
Halogen bulbs have pressurized gas inside and
can burst if you drop or scratch the bulb. You or
others could be injured. Be sure to read and
follow the instructions on the bulb package.
Headlamps and Parking Lamps
A. High-beam Headlamp
B. Low-beam Headlamp
C. Parking Lamp
To replace one of these bulbs:
1. Open the hood. See Hood Release on page 5-11
for more information.
2. Remove the bulb access cover from the bulb
(high or low-beam only) you need to change.
3. Turn the bulb socket counterclockwise and pull it
from the headlamp assembly.
4. Remove the electrical connector from the bulb
socket.
5. Holding the base of the socket, pull the old bulb
from the socket.
6. Install a new bulb.
7. Reverse Steps 2 through 5 to reinstall.
5-45
To Next Page
Loading...
Need help?
General
