4. To make the lap part tight, pull up on the
shoulder belt.
It may be necessary to pull stitching on the safety
belt through the latch plate to fully tighten the
lap belt on smaller occupants.
To unlatch the belt, push the button on the buckle.
The belt should go back out of the way. When the safety
belt is not in use, slide the latch plate up the safety
belt webbing. The latch plate should rest on the stitching
on the safety belt, near the guide loop.
Before you close a door, be sure the belt is out of the
way. If you slam the door on it, you can damage
both the belt and your vehicle.
1-20
To Next Page
Loading...
Need help?
General
