4. Turn the sealant canister so the inflator filling hose
is aligned with the slot in the compressor.
5. Lift the sealant canister from the compressor and
replace with a new sealant canister. See your
dealer/retailer for more information.
To install a new sealant canister, do the following:
1. Align the sealant filling hose with the slot in the
air compressor.
2. Push the sealant canister down and turn it
clockwise.
3. Wrap the sealant filling hose around the air
compressor channel to stow it in its original location.
4. Push the air compressor inflator hose onto the
sealant canister inlet and push the lever down.
5-83
To Next Page
Loading...
