KDB-GOM
Series
- 79 -
No 1 Part name Room thermostat
Replacement steps
Disassembly
①
Unplug the boiler from the electric outlet.
②
Separate the room thermostat by pulling up from the bracket.
③
Take the two screws connected with the thermostat wire off.
④
Separate the wire from the room thermostat.
Assembly
①
Connect the replaced wire to the thermostat by screwing the two screws.
②
Pull down the thermostat inside the bracket.
③
Plug the boiler into the electric outlet.
Caution
1. Don’t force disassembly.
2. After replacement, check the thermostat during boiler operation.
Room thermostat, FR-5
To Next Page
