Saturn Navien LST-17K User Manual

Explains the safety alert symbol and the meaning of DANGER, WARNING, and CAUTION.

Illustrates and defines general symbols used throughout the manual for guidance.

Details the recommended fuel types (kerosene/light oil) and proper storage guidelines.

Lists essential checks before operating the boiler, such as oil leaks.

Step-by-step guide on how to remove air from the oil filter and system.

Identifies key components of the boiler with labels and numbers.

Explains the function of the operation panel, LEDs, and error codes.

Explains the LCD display and the meaning of various icons for functions and status.

Describes the Power Heating Mode, its duration, and automatic return to previous mode.

Explains how to use the Outing Mode for minimal operation when away from home.

Steps to activate the boiler remotely using a telephone and specific button sequences.

Steps to suspend the boiler remotely via telephone, changing it to Outing Mode.

Explains safety functions related to combustion and insufficient water levels.

Details mechanisms for preventing overheating and freezing of the heating circuit.

Describes how the boiler safely stops operation during a power outage.

Outlines checks to be performed annually, including combustibles proximity and dust accumulation.

Details checks for oil leaks in pipes and water leakage from the boiler and pipes.

Instructions on regularly opening the drain plug of the oil tank to remove water.

Explains the need to clean the boiler internally to maintain life and efficiency.

Guides on cleaning the oil filter and draining the oil tank.

How to clean the flame detector's glassy surface to ensure correct automatic operation.

Recommends annual checks for loose joints, clogging, corrosion, or leaks in the exhaust pipe.

Criteria for choosing a suitable installation place, considering works, standards, and fire prevention.

Illustrates the standard piping for a cistern tank installation type.

Diagram showing the piping configuration for a sealed cistern tank system.

Lists critical precautions for installation, including pressure limits, valve usage, and backflow.

Recommendations for flue length, flexuosity, connections, and insulation for forced exhaust systems.

Emphasizes the importance of maintaining a 600mm clear zone around the flue end to prevent gas poisoning.

Essential safety checks before operating the converter, including voltage and connections.

Guidelines for securely fixing the room controller, considering temperature sensing and environmental factors.

Important notes on preventing metallic objects from entering, avoiding opening the case, and cleaning.

Illustrates connecting the room controller, KD-SP, and mounting the controller.

Diagram illustrating the configuration of a multi-floor system with converters and thermostats on different levels.

Provides physical dimensions and mounting hole specifications for the KDC-5P room converter.

Step-by-step instructions for installing the room thermostat, including bracket mounting and wiring.

Advises consulting sales agencies or A/S centers for any necessary part replacements or repairs.

A detailed diagram illustrating all electrical connections and wire color codes for the boiler.

A table listing common problems, their causes, and suggested solution methods for the boiler.

A list of numeric error codes displayed on the LCD and their corresponding causes.

Detailed specifications including heat output, fuel consumption, efficiency, and dimensions for LS models.