Saturn KDB - 251 GOM - Page 72

KDB-GOM
Series
- 72 -
13 # 17 Failure DIP switch setting error
No Symptoms and Causes Solutions Reference
The DIP switch located on the upper part
of the controller has not been set
according to capacity.
1 Failure code #17 is displayed although
the controller DIP switch has been set
according to capacity.
- The controller is defective and has to be
replaced.
<Fig. 1>
<Fig. 1>
Main Controller
NO 161GOM 201GOM 251GOM 301GOM
8
OFF OFF ON OFF
9
ON ON OFF OFF
10
ON OFF ON ON
NO ON OFF
1
Run Normal
2
Forced maximum
Combustion
Normal
3
Forced minimum
Combustion
Normal
4
FE FF
5
L.P. gas Natural gas
6
Close air type Open tank type
7
50 Hz 60 Hz
Check
DIP switch setting