Timer Mode is a function that boiler repeatedly operates 20- minute stop and
again that can be set in the range of hour 0~9, 50 minutes.
blinks when selecting Timer Mode. When blinks, set the desired
heating stop time.
It can be set by 10 min., up to 50min
in the range of hour 0~9 by adjusting
+/- button, after a while, it is
automatically saved.
After the setting is done, is on
and current room temp. is displayed.
Press the Mode button repeatedly,
until is displayed.
Set the heating stop time
with +/- button
Timer Mode
Heating stop time ā0ā means boiler is continuously operates.
In this case, heating temperature keeps increasing.
so, please be careful.
CAUTION
15
To Next Page
Loading...