7
Assembly
1. Insert the Powerhead into the rod. You will hear a “click” sound
when it is securely in place.
1. To install the rod, insert the plug end into the air inlet of the cleaner.
Once it is securely in place, you will hear a “click” sound.
1. When inserting accessories into the cleaner, you will hear a “click”
sound when each accessory is securely in place. To disassemble,
press the rod release button then pull the accessory out from the
air inlet.
WARNING! Switch Off the machine before fitting the machine rod and motorised head.
Before You Begin & Assembly
Connecting the Powerhead
Connecting the rod to the unit
Connecting accessories to the unit
To Next Page