11
158085
www.sauder.com/services
- Please read the back page of the instruction booklet for important safety information.
This completes assembly. Use your favorite type of furniture polish on all finished surfaces to enhance the beauty of the finish.
Do not
spray the polish directly onto the furniture. Spray the polish onto a cloth, then use the cloth to wipe the surface.
WARNING: This Sauder unit
has been designed for the
weights shown. Exceeding
these weights could cause
“sagging” of the part. Extreme
overloading could cause failure
of the part and possible injury.
- Slip a RUBBER SLEEVE (V) over each of the METAL PINS (W). Insert the METAL PINS into the hole locations
of your choice in the ENDS. Set the ADJUSTABLE SHELVES (F) onto the METAL PINS.
No load
25 lb.
25 lb.
35 lb.
25 lb.
40 lb.
To Next Page
Loading...
