Sauder 401291 - Page 3

Part Identifi cation
å While not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identifi cation to help identify similar parts.
A2 RIGHT END (1)
B2 LEFT END (1)
C2 TOP (1)
D2 SMALL BACK (1)
M58 BRACE (2)
M37 BASE (1)
G2 LARGE DRAWER FRONT (3)
D175 LARGE DRAWER BACK (3)
D22 LARGE RIGHT DRAWER SIDE (3)
D23 LARGE LEFT DRAWER SIDE (3)
D981 DRAWER BOTTOM (4)
L2 SMALL DRAWER FRONT (1)
D450 SMALL DRAWER BACK (1)
D245 SMALL RIGHT DRAWER SIDE (1)
D451 DRAWER DIVIDER (1)
M64 DRAWER BRACE (4)
M77 FRONT MOLDING (1)
R RIGHT MOLDING (1)
S LEFT MOLDING (1)
XX BACK (2)
D271 SMALL LEFT DRAWER SIDE (1)
Now you know
our ABCs.
401291www.sauder.com/services
Pae 3
A2
B2
C2
D2
M58
M37
G2
L2
M77
R
S
D271
M58
XX
M64
D451
D245
D450
D981
D981
D22
D23
D175
M64
XX