Hardware Identifi cation
å Screws are shown actual size. You may receive extra hardware with your unit.
DRAWER FRONT
BRACKET - 1
Z
ANGLE
BRACKET - 8
AA
MOLDING
CONNECTOR - 2
CC
METAL PIN - 4
JJ
KNOB - 2
KK
PULL MOUNT - 6
LL
PULL - 3
MM VV
WARNING LABEL - 1
(Refer to Step 17 for proper
location and application)
WARNING
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
• Place heaviest items in the lowest drawers.
• Unless specifi cally desined to accommodate, do not
set TVs or other heavy objects on top of this product.
• Never allow children to climb or han on drawers,
doors, or shelves.
• Never open more than one drawer at a time.
• If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce, but not
eliminate, the risk of tip-over.
This is a permanent label. Do not attempt to remove!
04/10 332296
401291 www.sauder.com/servicesPae 4
35AA
UNIVERSAL CABINET RAIL - 8
35AC
DRAWER RIGHT - 4
35AD
DRAWER LEFT - 4
SAFETY STRAP - 1
60M
SAFETY DRYWALL
ANCHOR - 1
61M
WASHER - 1
13M
HIDDEN CAM - 12
1F
CAM DOWEL -12
2F
Locate this nylon SAFETY
STRAP (60M) to be used
later in assembly. Do not
accidentally throw away.
METAL
BRACKET - 4
4G
To Next Page
Loading...
