Sauder 408726 - Page 12

Fasten the RIGHT END (A2) to the TOP (F2). Tighten two HIDDEN CAMS. Use a STRAIGHT EDGE SCREWDRIVER.
Fasten the SHELF (H3) to the RIGHT END (A2) and UPRIGHT (D2). Use four BLACK 1-15/16" FLAT HEAD SCREWS (LL).
Fasten a MAGNETIC CATCH (V2) to the SHELF (H3). Use a BLACK 1-1/8" PAN HEAD SCREW (KK).
8
8
S
t
e
p
BLACK 1-1/8" PAN HEAD SCREW
(1 used in this step)
KK
V2
A2
D2
F2
H3
Unfi nished edge
Unfi nished
surface
Maximum
210 degrees
Minimum
190 degrees
Arrow
Page 12 www.sauder.com/services 408726
LL
BLACK 1-15/16" FLAT HEAD SCREW
(4 used for the SHELF)