Sauder 408726 - Page 13

Fasten the LOWER RIGHT END (C) to the SHELF (H3). Tighten two HIDDEN CAMS.
Fasten the BOTTOM (I) to LOWER RIGHT END (C) and UPRIGHT (D2). Use four BLACK 1-7/8" FLAT HEAD SCREWS (DD).
9
9
S
t
e
p
Maximum
210 degrees
Minimum
190 degrees
Arrow
Page 13
www.sauder.com/services408726
C
I
D2
H3
Unfi nished
surface
Unfi nished edge
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
DD