Sauder 408726 - Page 6

Fasten the CABINET RAILS (O and P) to the LEFT END (B) and UPRIGHT (D2). Use four GOLD 5/16" FLAT HEAD SCREWS (II).
NOTE: The CABINET RAILS are marked “CR” and “CL” for easy identification.
2
2
S
t
e
p
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
II
Finished edge
Finished edge
Roller end
Roller end
Page 6 www.sauder.com/services 408726
O
P
B
D2