Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratching your unit or the fl oor.
å
To begin assembly, push a SAUDER TWIST-LOCK®
FASTENER (FF) into the large holes in the RIGHT END (A)
and LEFT END (B).
å
Repeat this step for the UPRIGHTS (C, D, and E),
MODESTY PANEL (H), SHELF (I), and both BRACES (L).
408761www.sauder.com/services
Page 5
(21 used)
FF
Do not tighten the TWIST-LOCK® FASTENERS in this step.
A
B
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1595
to watch a video on how to assemble your unit.
To Next Page
Loading...
