Sauder 408761 - Page 9

å
Insert four METAL PINS (KK) into the BRACES (L).
å
Insert the METAL PINS (KK) in the ends of the BRACES (L)
into the holes in the LEFT END (B) and UPRIGHT (C).
å
Now, fasten the BRACES (L) to the LEFT END (B) and
UPRIGHT (C). Tighten four TWIST-LOCK® FASTENERS.
Step 5
408761www.sauder.com/services
Page 9
Curved edge
Curved edge
L
L
C
B
Surface with
TWIST-LOCK®
FASTENERS
Surface with
TWIST-LOCK®
FASTENERS
These holes
must be here.
These holes
must be here.
KK
KK
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution