Sauder 410375 - Page 14

11
 Fasten three ANGLE BRACKETS (T) to the SHELF (G). Use three BLACK 9/16” LARGE HEAD SCREWS (Z).
 Fasten the SKIRT (O) to the SHELF (G). Use three BLACK 9/16” LARGE HEAD SCREWS (Z).
NOTE: There are no pre-drilled holes in the SKIRT. The SCREWS will tighten into the groove.
BLACK 9/16” LARGE HEAD SCREW
(6 used in this step)
Z
(3 used)
T
G
O
www.sauder.com/services
410375