Sauder 410375 - Page 13

10
 Fasten five ANGLE BRACKETS (T) to the LOWER ENDS (C and D) and BOTTOM (F). Use five BLACK 9/16” LARGE
HEAD SCREWS (Z).
NOTE: Be sure the ANGLE BRACKETS are even with the edges of the LOWER ENDS and BOTTOM.
 Fasten the BASE (L) to the LOWER ENDS (C and D) and BOTTOM (F). Use five BLACK 9/16” LARGE HEAD
SCREWS (Z).
D
F
C
L
(5 used)
T
T
T
Rounded edge
www.sauder.com/services
BLACK 9/16” LARGE HEAD SCREW
(10 used in this step)
Z
410375