Sauder 412314 - Step 7: Upright Connection and Caution; Upright Panel Joining; Hidden Cam Tightening Warning

412314
www.sauder.com/services
7
 Fasten the LEFT UPRIGHT (C) to the RIGHT UPRIGHT (B). Tighten three HIDDEN CAMS.
B
C
Unfi nished
surface
Unfi nished
surface
Finished
edge
Caution
Risk of damage or
injury. Hidden Cams
must be completely
tightened. Hidden
Cams that are not
completely tightened
may loosen, and parts
may separate.
To completely tighten:
Start Tighten
Arrow
Arrow
Maximum
210 degrees
Minimum
190 degrees