Sauder 412314 - Step 12: Hinge Attachment; Hinges to Keyboard Parts

www.sauder.com/services
12
412314
 Fasten two HINGES (X) to the KEYBOARD FRONT (K). Use four SILVER 5/8” FLAT HEAD SCREWS (EE).
 Fasten the HINGES (X) to the KEYBOARD SHELF (N). Use two SILVER 9/16” LARGE HEAD SCREWS (FF).
N
K
SILVER 5/8” FLAT HEAD SCREW
(4 used in this step)
EE
SILVER 9/16” LARGE HEAD SCREW
(2 used in this step)
FF
X