Sauder 413852 - Page 16

Step 12
å
Carefully stand your unit upright.
å
Fasten the HEADBOARD (E) to the LOWER BRACE (N).
Use three SILVER 1-1/8" FLAT HEAD SCREWS (10S).
å
Fasten the HEADBOARD (E) to the METAL BRACKETS on
the ENDS (A and B). Use two BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
NOTE: Follow steps 13-16 for Headboard on the Right.
å
NOTE: Follow steps 17-20 for Headboard on the Left
413852 www.sauder.com/servicePage 16
Headboard on the RIGHT
Headboard on the LEFT
BLACK 9/16" LARGE HEAD SCREW
(2 used for the METAL BRACKETS)
1S
SILVER 1-1/8" FLAT HEAD SCREW
(3 used for the LOWER BRACE)
10S
SILVER 1-1/8" FLAT HEAD SCREW
(3 used for the LOWER BRACE)
10S
Finished
surface
Finished
surface
Roller end
Rounded edge
Roller end
Rounded edge
E
N
B
A
A
B
N
E