Sauder 414356 - Step 3: Securing Top Molding

å
Fasten the TOP MOLDING (M28) to the TOP (E). Use
three BLACK 1-1/8" PAN HEAD SCREWS (Y).
å
NOTE: Do not overtighten the SCREWS into the TOP.
å
Insert three HOLE PLUGS (V) into the holes in the
TOP MOLDING (M28).
Step 3
414356www.sauder.com/services
Page 7
Curved edge
E
V
BLACK 1-1/8" PAN HEAD SCREW
(3 used in this step)
Y
M28
Do not overtighten
the SCREWS (Y).
Just think. The sooner
you do this, the sooner
you do something else.