Step 22
419119 www.sauder.com/servicesPage 26
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R).
Insert the METAL PINS into the hole locations of your choice
in the ENDS (A and B) and UPRIGHTS (C and D). Set the
ADJUSTABLE SHELVES (M and N) onto the METAL PINS.
å
Separate a CARD from the CARD SHEET (38M) and insert
into each CARD HOLDER on the ADJUSTABLE SHELF
MOLDINGS (V and W).
(12 used)
2R
1R
M
N
W
N
V
B
D
C
A
(2 used)
38M
To Next Page
Loading...
