Sauder 419200 - Step 6: Attach Base and Top Molding

å
Fasten the BASE (G) and TOP MOLDING (I) to the TOP/
BOTTOMS (C). Use six BLACK 9/16" LARGE HEAD
SCREWS (1S) through the ANGLE BRACKETS on the
TOP/BOTTOMS and into the BASE and TOP MOLDING.
Step 6
419200 www.sauder.com/servicesPage 10
Don't worry. It isn't
Rome. This can be built
in a day.
C
C
G
I
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
Unfi nished edge
Unfi nished edge